|
Video Compression |
|
Compression |
MPEG-4 SP, MJPEG selectable |
|
Picture Resolution |
Full D1 (720 x 480 in NTSC, 720 x 576 in PAL)
VGA (640 x 480 in NTSC, 640 x 480 in PAL)
CIF (352 x 240 in NTSC, 352 x 288 in PAL)
QCIF (176 x 120 in NTSC, 176 x 144 in PAL)
(per channel) |
|
Bit Rate |
28K ~ 3M bps (per channel) |
|
Image Frame Rate |
30fps at full D1 resolution (NTSC)
25fps at full D1 resolution (PAL) (per channel) |
|
Multi-stream |
Up to 2 configurable frame rate/bit rate streams for preview and recording
(per channel) |
|
Video Input |
|
Composite Input |
4, CVBS, 1.0Vp-p with 75Ω loading, BNC Connector |
|
Audio Input |
|
Compression |
8 kHz, Mono, PCM |
|
Audio Line Input |
4, Unbalanced, 1.4 Vp-p, 1Vrms, 3.5 mm Phone Jack |
|
Audio Output |
|
Compression |
8 kHz, Mono, PCM |
|
Audio Line Output |
4, Unbalanced, 1.4 Vp-p, 1Vrms, 3.5 mm Phone Jack |
|
Alarm |
|
Input |
2, TTL, terminal block (per channel) |
|
Output |
2, TTL, terminal block (per channel) |
|
Remote Control |
|
Serial Port |
RS-485: half duplex, terminal block
RS-422: full duplex, terminal block
RS-232**: full duplex, terminal block
(per channel) |
|
External I/O |
|
Reset Button |
Factory default |
|
LED |
System status (per channel) |
|
Network |
|
Ethernet Port |
Ethernet (10/100 Base-T), RJ-45 connector |
|
Protocol |
TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP, FTP, SMTP, DNS, DDNS, NTP, ICMP, IGMP, ARP |
|
Software |
|
Web Browser |
Microsoft Internet Explorer 6.0 or above |
|
SDK |
ACTi SDK-10000 |
|
PTZ Protocol* |
Pelco-P_type1, Pelco-P_type2, Pelco-D, Dynacolor, Samsung, VCL, Videotrek, Kampro-V1, Kampro-V2 |
|
Security |
Password protection: configured by the administrator |
|
Operating |
|
Temperature |
0C ~ 40C (32F ~ 104F) |
|
Power |
|
Power Requirement |
DC 12 V 10% |
|
Power Consumption |
16 W |
|
Physical |
|
Dimensions (WxHxD) |
170 mm x 42.7 mm x 149 mm
(6.70" x 1.68" x 5.87") |
|
Weight |
820 g (1.80 lb) |
* These PTZ protocols are supported in ACTi NVR and Streaming Explorer.
** Adjust by inside jumper. |