Specs:

Long recording time
Easy backup with USB FLASH DRIVE
Alarm trigger recording will send images to designated e-mail and FTP address
Advanced motion detection function (4 different adjustable factors of motion detection sensitivity)
Convenient search function.
Support covert screen for live view channels
IR remote control of the system and PTZ through RS-485
Support PELCO-D protocol for PTZ Control
Support static IP, PPPOE, and DHCP with DDNS function
Record audio with 4ch in and 2ch mono audio out
Remote surveillance support through licensed software AP, and IE browser on PC's
Remote surveillance also available through mobile phone via 3G & GPRS
Web surveillance supports 5 viewers simultaneously

DVR Remote Features

Live simultaneous remote view of all cameras or full view of each camera
Allows remote control of PTZ cameras
Remotely search and perform video playback by selecting events caused by motion, alarm triggers by date and/or time periods for each or all cameras.
Remotely download camera snapshots and video to your PC or laptop.
Remotely view live video from cameras to your browser enabled cell phone.
Local audio can be remotely downloaded to your PC or laptop for playback.

MODEL	SCW 785
Video format	NTSC or PAL (switch able)
Video Compression Format	MPEG-4
Video Input	8 Channels. Composite video signal 1 Vp-p 75Î© BNC
Video Loop Out	8 Channels. Composite video signal 1 Vp-p 75Î© BNC
Video Output	Main Monitor Output : Composite video signal 1 Vp-p 75Î© BNC Call Monitor Output : Composite video signal 1 Vp-p 75Î© BNC
Recording Rate	Frame: 720 x 480 pixels with 60 IPS (NTSC) ;720 x 576 pixels with 50 IPS (PAL) CIF: 352 x 240 pixels with 240 IPS (NTSC) ;352 x 288 pixels with 200 IPS (PAL)
Adjustable Recording Speed	Frame: 60, 30, 15, 7 IPS / 50, 25, 12, 6 IPS CIF: 240, 120, 60, 30 IPS / 200, 100, 50, 25 IPS
Image Quality Setting	Best, high, normal, and basic
Hard Disk Storage	IDE type, ATA66, support HDD x 2, support each HDD capacity over 400GB
HDD Quick Format	HDD Quick Format 250GB under 2 seconds
Recoding Mode	Manual / timer / Motion / Alarm
Refresh Rate	240 frames per sec. for NTSC 200 frames per sec. for PAL
Pentaplex Operation	Pentaplex function (live display, record, playback, backup, and network)
Audio I/O	4 audio inputs, 2 audio outputs (Mono)
Motion Detect Area	16 x 12 grid per camera / 16 camera
Motion Detect Sensitivity	4 adjustable variable with precise calculation for motion detection
Pre-alarm Recording	Yes (8MB)
Backup Device	USB1.1 Backup, and Network Remote Recording Backup
Web Transmitting Compression Format	Motion JPEG
Ethernet	10/100 Base-T. Support Remote Control and Live View via Ethernet
Mobile Surveillance	Support GPRS to access the system via mobile phone (require J2ME, MIDP2.0 protocol)
Web Interface	Support licensed software AP, and IE browser
Remote Alarm Notification	E-mail Images, and Images Uploading to FTP Site's Specific Account
Network Connection	Support static IP, dynamic IP, and DHCP with DDNS function
Remote Control	Remote control DVR and PTZ via IR transmitter
PTZ	Support PELCO-D protocol
Dwell Time (Sequential Channel Switch)	Programmable With Adjustable Dwell Time
Alarm I/O	8 inputs, 1 output
Picture Zoom	Support 2X digital zoom function
Key Lock	Yes
Video Loss Detection	Yes
Camera Title	Support up to 6 letters
Video Adjustable	Hue / Color / Contrast / Brightness
Date Display Format	YY/MM/DD, DD/MM/YY, MM/DD/YY, and Off
Daylight Saving	Yes
Power Source	DC 19V
Current Consumption	< 64W
Operation Temperature	10 ~ 40Â° C
Dimension (mm)	432mm (W) x 90mm (H) x 326mm (D)
System Recovery	System auto recovery after power reconnected
Optional Peripherals	Independent Disk Array

Photos:

Drivers:

Accessories: