Residential Department
Housing Brackets

• In-Ceiling Mount for ATD-1000 PTZ Camera
• Provides a flush surface mount for PTZ, only the bubble shows through the ceiling
• Includes: Power Supply, Cables, Base Board, Housing and Bubble Dome Cover

• Solid end walls permit drilling to job specific requirements.
• Can be used to house encoders, decoders, transmitters/receivers, POE injectors, etc.
• 8" X 10" X 4" inside dimensions

• Outdoor / Indoor - Camera Housing
• Nylon + Fiber Glass in Beige
• Certificate: CE
• Appearance: 151mm (W) x 145mm (H) x 390mm (L)
• Suitable Camera: 95mm (W) x 80mm (H) x 250mm (L)
• Optional Accessories: Heater, Blower, IR LED
• 12VDC / 24VAC / 110VAC / 220 VAC
• Package: 8 pcs / ctn / 630mm x 405mm x 340mm
• IP-66 Rating
• Cable Thru Wall Mount
• Work with VHM-208 & VHM-209

• Construction: Aluminum coated black/white optional
• Max Load 2kg
• Height: 225mm
• Base size:100 x 80 x 3mm
• Swivel angle 360 Degrees
• Weight 1075gm
• Tilt angle 180 Degrees

• 61/2' Extension size
• Beige color

Wall mount Bracket for most Indoor Plastic Dome Cameras

• Mounting Bracket with T-BAR

Mounting Bracket 2 Point Swivel Function

Mounting Bracket with T-BAR

• Medium size metal mounting bracket for TFT Monitors, Telescope, Cameras

• Heavy duty, steel construction
• Integral J-Box mounting plate with 0.625" round cable pass thru hole
• Includes three adjusting knuckles
• Knob and tamper-resistant set-screw adjusting options included with each knuckle

• Flexible mount, 16" long
• Double wound shaft will not droop or require safety wires
• Shaft is covered with durable black vinyl
• Knob and tamper-resistant set-screw adjusting options are included
• The base accepts the shaft in a vertical or horizontal position

• Adjustable shaft
• Adjusts from 9.375 inches to 13.625"
• Knob and tamper-resistant set-screw adjusting options included

• Hollow aluminum shaft with slot for cable pass through
• Knob and tamper-resistant set-screw adjusting options included
• Integral J-Box mounting plate
• 6" overall length from base to top of lock-ring

• Hollow aluminum shaft for cable pass through
• Knob and tamper-resistant set-screw adjusting options are included

• This bracket attaches to 3/4" conduit and is used to make long ceiling drops.
• For cameras weighing up to five lbs.
• Includes both knob and set-screw adjusting options

• Knob and tamper-resistant set-screw adjusting options are included
• 0.5" diameter solid steel shaft
• Length of mount from base to front of mount is 4"
• Length of mount from bottom of angle to top of mount is 3.4"
• 1/4-20 stud with lockring, adjustable at the camera.
• Knob and tamper-resistant set-screw adjusting options are included
• Matching vinyl cover adds a finished look
• 2" round base

• This bracket mounts on 3/4" conduit and is used to make long ceiling drops
• For cameras weighing up to 3 lbs.
• Includes both knob and set-screw options

• Magnet holds up to 5 lbs.
• Base is 2.75" in diameter
• 1/4-20 Mounting stud

• Includes bolt holes and strap slots
• Will mount to poles of at least 1.25" in diameter
• Strap slots will accept straps up to 0.75" wide

• Our most versatile mount. Twelve different configurations with one unit
• Solid steel shafts
• Knob and tamper-resistant set-screw adjusting options are included
• Matching vinyl cover adds a finished look

• Adds 3" to the length of the 854-3-4 conduit mount

• Will fit on a standard single gang electrical box
• Cable pass through hole is 0.625 inches and will allow a standard BNC connector to pass through.
• Use this plate with  #845-246 and #883T mounts

• Listed here for replacment purposes.  This clip is included with the 845-246 Deluxe Micro Mount

• All aluminum, gauge 11, alloy #3105H14
• 3/16' clear polycarbonate
• Abrasive resistant
• Cover Locked by 3 security hex socket screws
• White Finish polyurethane coating
• 1.5 lb (0.7 kg)

• 90 Degree Night Vision illumination
• 84 IR LEDs / Switched on/off by cell

• Outdoor / Indoor - Camera Housing
• Nylon + Fiber Glass in Beige
• Certificate: CE
• Appearance: 151mm (W) x 145mm (H) x 390mm (L)
• Suitable Camera: 95mm (W) x 80mm (H) x 250mm (L)
• Optional Accessories: Heater, Blower, IR LED
• 12VDC / 24VAC / 110VAC / 220 VAC
• Package: 8 pcs / ctn / 630mm x 405mm x 340mm
• IP-66 Rating
• Cable Thru Wall Mount
• Work with VHM-208 & VHM-209

• Outdoor / Indoor - Camera Housing
• Nylon + Fiber Glass in Beige
• Certificate: CE
• Appearance: 151mm (W) x 145mm (H) x 390mm (L)
• Suitable Camera: 95mm (W) x 80mm (H) x 250mm (L)
• Optional Accessories: Heater, Blower, IR LED
• 12VDC / 24VAC / 110VAC / 220 VAC
• Package: 8 pcs / ctn / 630mm x 405mm x 340mm
• IP-66 Rating
• Cable Thru Wall Mount
• Work with VHM-208 & VHM-209

• Outdoor / Indoor - Camera Housing
• Nylon + Fiber Glass in Beige
• Certificate: CE
• Appearance: 151mm (W) x 145mm (H) x 390mm (L)
• Suitable Camera: 95mm (W) x 80mm (H) x 250mm (L)
• Optional Accessories: Heater, Blower, IR LED
• 12VDC / 24VAC / 110VAC / 220 VAC
• Package: 8 pcs / ctn / 630mm x 405mm x 340mm
• IP-66 Rating
• Cable Thru Wall Mount
• Work with VHM-208 & VHM-209

• Wall Bracket for Mag-CD600

Quickly and Easily Mount any VESA? LCD TV/ Monitor
Low-Profile Design
Fast, Simple Wall Mounting
Meets VESA? Standards (75x75mm and 100x100mm)
Load up to 33 lbs / 15 kgs*
Includes Stud Mount Wall Plate, Monitor Plate and Hardware Kit
Fully Adjustable and Viewable at any angle
Powder Coated, Brushed Aluminum Construction
Packaged in Attractive Display Box

FLAT-PANEL CCTV MONITOR BRACKET FOR MONITORS 10? - 30?
FITS STANDARD VESA? MONITORS 50mm / 75mm / 100mm
MAXIMUM WEIGHT 44 LBS.
EXTENDABLE CEILING POLE CAN LOWER
ADJUSTABLE HEAD CAN ROTATE 190?
ADJUSTABLE HEAD CAN PIVOT ? 20?
ABS PLASTIC AND BRUSHED ALUMINUM CONSTRUCTION
BLACK COLOR

• For Vesa Mounting 50x50, 75x75x, 10x100mm
• Adjustable tilt 15* up and down
• Swivel Lweft and Right
• Max clearence from wall 13cm
• Supports up to a 22.7 kg (501lbs) load
• LCD Monitor swivel 360*
• Hardware included 

• LCD TV / Monitor Flat Panel Flush Mount Wall Bracket
• Not to exceed 66 LB (30 KG) Weight Limit

(Pole Diameter of 5' to 10') 8' Wide

for AS75W and AH75WP

for CG30 and CG31 (Mini B/W Camera)

• Indoor or outdoor use
• Side opening
• 17" Overall length
• Enclosure will accommodate a camera/lens combination of up to 7" in length
• Includes heater & blower  (Requires 24 VAC, 12 VA)

6' Pod fits full body cameras in a ceiling Dome mount. Allows for any camera and Lens combination.

Dimensions 14' x 5' x 4'

Dimensions 14' x 5' x 4'

4.75' Dome Housing (No Camera)