|
Solar Power Cells
|
|
SPS400 |
SPS400TX |
SPS400C |
|
Solar Input Voltage |
20V max |
20V max |
20V max |
|
Camera Output Voltage |
11Vdc – 13.5Vdc (under load) |
11Vdc – 13.5Vdc (under load) |
11Vdc – 13.5Vdc (under load) |
|
Max. Charge Current |
3 Amp |
3 Amp |
3 Amp |
|
Max Output Current |
400mA |
400mA |
400mA |
|
Battery Capacity |
10.5 Ah @ 12V |
10.5Ah @ 12V |
10.5Ah @ 12V |
|
Dimensions-Panel |
38”x 14”x2” |
38”x14”x2” |
38”x14”x2” |
|
Dimensions- Control Box |
8”x8”x4” |
8”x8”x4” |
8”x8”x4” |
|
Weight- Panel |
15 lbs |
15 lbs |
15 lbs |
|
Weight- Control Box |
10 lbs |
10 lbs |
10 lbs |
|
Hours of sunlight for full capacity |
8 hours w/ 18W panel |
8 hours w/ 18W panel |
8 hours w/18W panel |
|
Input connector |
CPC 3 Pin |
CPC 3 Pin |
CPC 3 Pin |
|
Output connector |
CPC 3 Pin |
CPC 6 Pin |
CPC 3 Pin |
|
RF Connector |
NA |
SMA-Female |
N/A |
| |
$795.95
|
$995.95
|
call for price
|
 Product Specification
The SPS Series solar power supplies are designed to
provide constant power for CCTV and other related equipment in an outdoor
environment. All devices are weatherproof and come complete with control box and
solar panels. Supplied connectors for CCTV equipment are 2.1x 5.5 power jack
(center pin positive). The SPS400TX comes with a female RCA type connector and
power jack for attaching the video camera.
- These devices have no low voltage protection. Do not let the
battery voltage drop below 9.5V.
- Do not drop.
- The battery has a life span of approximately 400-600 cycles. The battery may
be changed by removing the cover of the control box and removing the thumb
screws holding the battery. Replace with a compatible SLA battery.
- The solar panel should be placed in an area that receives full sun. Mount the
panel facing south elevated at 20-45 degrees.
Important Notes:
1. Turn power switch off and let system recharge if battery voltage drops
below 9.0 volts. Reposition solar panel if needed for more sunlight.
2. Do not leave charging for longer than 4 days without having camera connected
and switched on.
3. Do not draw more current than specified. 150mA for SPS150, 400mA for SPS400,
and ~250mA for SPS400TX with transmitter enabled.
4. Attach all external devices to the SPS system before turning the system on.
5. Internal fuse is 2A slow blow. Replace with similar fuse if needed
(supplied).
6. For system help or a list of available accessories, please email your sales
rep
Installation Procedure
3 pin power output cable (SPS150, SPS400)
6 pin power/audio/video cable (SPS400TX)
3 pin solar cable (all models)
18W Solar Panel
System Input Side (solar side)
System Output Side (Camera Side)
1. Mount control box to location using plastic feet if needed.
2. Securely mount solar panel. Face panel south at a 10-45 degree angle. Make
sure solar panel does not get shaded during the day.
3. Connect 3 pin solar cable to input side of system. Connect the other end of
the cable to the solar panel or solar panel extension cable.
4. Connect either 6 pin P/A/V cable (SPS400TX) or 3 pin power output cable
(SPS150, SPS400) to output side of system.
5. Connect the other end of the output cable to camera.
6. Turn system on.
| 
Power-Video-Data
We have great prices and fast service with our own line of Security products as well as very popular domestic brands. With warranties on everything we sell so you are sure to get great service. Security Camera World is a very progressive company so you will find we have many state of the art products at the very lowest pricing. Our Dealer Control center offers a wide range of tools from a website to intergraded tracking and management of your orders to help keep your business ahead of the curve.
If you are looking for a driver or supportive software for your DVR, NVR, Camera or accessories our downloads section should provide you with what you need.
We provide how to instructions and manuals for most of our products to help our customers with most of their frequently asked questions. Please check out our step by step guides on how to install and configure our products?
