-
Does not interfere with Wi-Fi networks.
-
Highest Quality of Service (QoS) available - Synchronous
point to point protocol enables extremely low data
latency and jitter.
-
128bit encrypted payload protection provides secure
data delivery.
-
Simple plug and play - pre-configured as matched pairs
with no user programming required.
-
Operates in the 902-928MHz band and does not require
an FCC license to operate or install.
-
VLAN extensions supported.
-
RF transmission rate: 1.54 Mb/s
-
Throughput: 935 Kb/s
-
Output power: +21dBm – (4 Watts EIRP with 15dBi antennae)
-
Receive sensitivity: -100dBm at 10e-4 BER (-112dBm with 15dBi antennae)
-
Latency: < 1ms – assuming a dedicated wireless link to client device.
-
Voltage : 4.5 - 9 VDC
-
Current consumption: RX 260 mA TX 350 mA
-
Radio channels: 12 Non-overlapping
-
Automatic frequency select: Yes – radio channel automatically selected and adaptively optimized
-
Manual frequency mode: Yes
-
Status LEDs: Power, RF Link, Ethernet Link, Traffic, RF RX, RF TX, 4/Channel and 6/Link Quality
-
Error correction technique: Sub-block error detection and retransmission
-
Adjacent-band rejection: >60dB - SAW receiver filter attenuates cellular and pager interference.
-
Temperature range -40C to 70C
-
Power over Ethernet: Compatible with common 5V splitters (Linksys WAPPOE)